 |
 |
| MBD-X10QBL-4 |
|
| |
|
| Form Factor |
|
| Dimensions |
- 16.79" x 16.4" (42.65cm x 41.66cm)
|
| |
|
| CPU |
- Intel® Xeon® processor E7-4800 v3, Intel® Xeon® processor E7-4800 v4, Intel® Xeon® processor E7-8800 v3, Intel® Xeon® processor E7-8800 v4.
- Quad Socket R (LGA 2011) supported, CPU TDP support 165W TDP, 1 QPI up to 9.6GT/s
|
| Cores / Cache |
- Up to 24 cores / Up to 60 MB cache
|
| |
|
| Memory Capacity |
- Up to 4TB 3DS ECC RDIMM, DDR4-1866MHz; Up to 4TB 3DS ECC LRDIMM, DDR4-1866MHz, in 32 DIMM slotsSupports 4TB DDR4 ECC LRDIMM
|
| Memory Type |
|
| DIMM Sizes |
- 4GB, 8GB, 16GB, 32GB, 64GBRDIMM: 4GB, 8GB, 16GB, 32GB, 64GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- 1 SATA2 (3 Gbps) ports; RAID 0,1,5,10
- 1 SATA3 (6 Gbps) ports; RAID 0,1BBU option support, JBOD support (IT Mode)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Dual LAN with Intel® i350 Gigabit Ethernet Controller
Single LAN with Virtual Machine Device Queues reduce I/O overhead
Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| SATA |
- 2 SATA3 (6Gbps) port
- 4 SATA2 (3Gbps) ports
|
| LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 6 USB 2.0 ports (3 rear + 2 headers + 1 Type A)
|
| Video Output |
|
| Serial Port / Header |
- 2 COM Ports (1 rear, 1 header)
|
| TPM |
|
|
|
|
| PCI-E |
- 2 PCI-E 3.0 x8,
- 2 PCI-E 3.0 x16
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| Software |
- IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, KVM with dedicated LAN, SPM, SUM, SuperDoctor® 5, Watchdog
|
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| |
|
| Voltage |
- +1.8V, +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator, Chipset Voltage, HT, Memory, Monitors for CPU Cores, VBAT
|
| FAN |
- 8x 4-pin fan headers (up to 8 fans), 4x 9cm + 3x 8cm fans w/ speed control, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control
|
| Temperature |
- Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, I2C temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection, Chassis intrusion header, SDDC
|
|
