 |
 |
| MBD-X10SRA-F |
|
| |
 |
| Form Factor |
|
| Dimensions |
- 12" x 9.6" (30.48cm x 24.38cm)
|
| |
 |
| CPU |
- Intel® Core™ i7 Processor (Socket R3), Intel® Core™ i7 Processor Extreme Edition (Socket R3), Intel® Xeon® Processor E5-1600 v3, Intel® Xeon® Processor E5-1600 v4, Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4.
- Single Socket R3 (LGA 2011) supported, CPU TDP support Up to 150W TDP
|
| Cores / Cache |
- Up to 22 cores † / Up to 55MB† cache
|
| Note |
- † BIOS version 2.0 or above is required
|
| Note |
- ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
|
| |
 |
| Memory Capacity |
- Up to 256GB Registered ECC RDIMM; Up to 1TB 3DS ECC LRDIMM8 288-pin DDR4 DIMM slots,
- Up to 512GB ECC LRDIMM ,
- Up to 128GB DDR4 ECC/non-ECC UDIMM (available with Core i7 only)
|
| Memory Type |
- 2400†/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs
|
| DIMM Sizes |
- RDIMM: 4GB, 8GB, 16GB, 32GB
- LRDIMM: 32GB, 64GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
 |
| Chipset |
|
| SATA |
- Intel® C612 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
|
| IPMI |
- OOB Bios refresh function is not supported
|
| Network Controllers |
- Intel® i210 Gigabit Ethernet ControllerShare with IPMISupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
|
| |
 |
| SATA |
|
| LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
|
| USB |
- 8 USB 3.0 ports (6 rear + 2 headers); 4 USB3.0 ports could be upgraded to 4 USB3.1(10 Gb/s) ports (2 rear, 2 by header)(BOM option)
|
| Video Output |
|
| Serial Port / Header |
|
| TPM |
|
|
 |
 |
| PCI-E |
- 4 PCI-E 3.0 x16
- 2 PCI-E 2.0 x1 (in x4 slot)
- *4 PCI-E3.0x16 slots are running at 16/16/NA/8 or 16/8/8/8
- *PCI-E Slot#1 (x4) and Slot#4 (x16) are disabled when an Intel Core i7-5820K is installed
|
| |
 |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.7.1
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
| |
 |
| Software |
- IPMI2.0, SuperDoctor® 5, SuperDoctor® III, Watchdog
|
| Power Configurations |
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| |
 |
| Voltage |
- +12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT
|
| FAN |
- 5x 4-pin fan headers (up to 5 fans), Fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for on/off control, Status monitoring for speed control, Thermal control tachometer fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
|
| LED |
- CPU / System Overheat LED, Suspend static indicator LED
|
| Other Features |
- Chassis intrusion detection, Chassis intrusion header, Chipkill support, RoHS
|
| |
 |
| Operating Temperature Range |
- 0°C ~ 50°C (32°F ~ 122°F)
|
|